The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts. article number ▲ new (old) ▼ ▲ article description: ▼ #01 (01902025) Press plunger ▶ details 2
4 Stück (01900132) Polystone M guide, green, with 2 chamfers ▶ details 3
4 Stück (01900850) Pressure plates, turned on edge SEL ▶ details 4
1 Stück (01900185) Plastic guide, coloured, ▶ details 5
1 Stück (01900835) Pressure plates 80 x 5 x 1830 mm ▶ details 6
2 Stück (25200000) Split pin no. 6 ▶ details 7
2 Stück (01902355) Cylinder pin, hardened, for ram ▶ details 8
2 Stück (01902205) Cylinder attachment Piston SPB/ST SEN/SEL ▶ details 9
35 Stück (01902152) [ehemals 103374] Set collar 30 x 25, M 12 ▶ details 10
35 Stück (01902155) Set screws ISO 4017 12 x 65 V4A ▶ details 11
35 Stück (01902170) Toothed lock washers M 12 galvanized, DIN 6797 ▶ details 12
35 Stück (01902165) Hexagon nuts ISO 4032 M12 V4A ▶ details 13
2 Stück (01902370) Mounting cover SEL / SEN ▶ details 14
1 Stück (01901030) Sliding plate ▶ details 15
2 Stück (01901115) Bracket on the sliding plate, bottom ▶ details 16
4 Stück (01901118) Fastening screw for carrier ▶ details 17
4 Stück (01901120) tappet for ram plate ▶ details 18
8 Stück (01901118) Fastening screw for carrier ▶ details 19
2 Stück (01901127) Fastening lug Tapp. Sliding plate ▶ details 22
4 Stück (01901118) Fastening screw for carrier ▶ details 24
2 Stück (01901125) Carrier for top SEL sliding plate ▶ details 25
2 Stück (01901126) Retaining piece for driver ▶ details 26
4 Stück (01901117) Fastening screw for carrier ▶ details 27
4 Stück (01902170) Toothed lock washers M 12 galvanized, DIN 6797 ▶ details 28
1 Stück (01901020) Sliding plate for SEL incl. driver (top) ▶ details #26 Three-part flap with lower cable attachment ▶ details #27 Three-part flap, upper rope attachment ▶ details article number new
Husmann Spare parts catalogue
1