Husmann Spare parts catalogue Article sorted by sub-Machine groups to:ST-SEL plunger
The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts.
article number new (old)
article description:
#01
(01902025)
Press plunger for SPB SEL & ST SEL
L 195 x B 67.5 H 59.2 cm 400 Kg MB00051237
2
4 Stück
(01900132)
Polystone M guide, green, with 2 chamfers for SPB SEL
L 65 x B 8.5 H 4 cm 2 Kg MB00050427
3
4 Stück
(01900850)
Pressure plates, turned on edge SEL 80/25 x 5 x 645 mm
L 64.5 x B 11.1 H 0.5 cm SQ00231521
4
1 Stück
(01900185)
Plastic guide, coloured, for SEN, SEL
L 184 x B 8.5 H 4 cm 6 Kg SQ00231529
5
1 Stück
(01900835)
Pressure plates 80 x 5 x 1830 mm for SPB SEN / SEL
L 183 x B 8 H 0.5 cm SQ00231520
6
2 Stück
(25200000)
Split pin no. 6 8 x 50
7
2 Stück
(01902355)
Cylinder pin, hardened, for ram AN, K, SEN,SEL, ECA, ECN-L
L 21 x B 3.5 cm
1
8
2 Stück
(01902205)
Cylinder attachment Piston SPB/ST SEN/SEL
SQ00231523
9
35 Stück
(01902152) [ehemals 103374]
Set collar 30 x 25, M 12 mit Bund (Druckstück)
SQ00231498
10
35 Stück
(01902155)
Set screws ISO 4017 12 x 65 V4A
11
35 Stück
(01902170)
Toothed lock washers M 12 galvanized, DIN 6797
12
35 Stück
(01902165)
Hexagon nuts ISO 4032 M12 V4A
13
2 Stück
(01902370)
Mounting cover SEL / SEN 80 mm diameter
2
14
1 Stück
(01901030)
Sliding plate for SEL incl. driver (bottom)
L 193 x B 47.3 H 4.6 cm 115 Kg SF00199288
2
15
2 Stück
(01901115)
Bracket on the sliding plate, bottom Fl. 40 x 10 x 190 mm
SF00199191
16
4 Stück
(01901118)
Fastening screw for carrier Sliding plate SEL, bottom/ center M 12 x 50 ISO 4017 8.8
17
4 Stück
(01901120)
tappet for ram plate for SPB SEL Vertical
L 6.0 x B 1.5 H 8.0 cm 0.5 Kg SF00199192
18
8 Stück
(01901118)
Fastening screw for carrier Sliding plate SEL, bottom/ center M 12 x 50 ISO 4017 8.8
19
2 Stück
(01901127)
Fastening lug Tapp. Sliding plate Fl. 30 x 10 x 100 mm
22
4 Stück
(01901118)
Fastening screw for carrier Sliding plate SEL, bottom/ center M 12 x 50 ISO 4017 8.8
24
2 Stück
(01901125)
Carrier for top SEL sliding plate incl. screw connection
25
2 Stück
(01901126)
Retaining piece for driver from the SEL sliding plate top
SF00199197
26
4 Stück
(01901117)
Fastening screw for carrier M 12 x 40 ISO 4017 8.8
27
4 Stück
(01902170)
Toothed lock washers M 12 galvanized, DIN 6797
28
1 Stück
(01901020)
Sliding plate for SEL incl. driver (top) für SEL inkl. Mitnehmer (Oben)
L 193 x B 47.3 H 4.6 cm 115 Kg SF50008579
1
#26
Three-part flap with lower cable attachment for ST SEL
1