The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts. Artikkelnummer ▲ ny (gamle) ▼ ▲ Beskrivelse av artikkelen: ▼ 1
1 Stück 104125(01902015) Press plunger for SPB SEN ▶ detaljer 2
4 Stück 100515(01900415) Polyamide strip 85 x 40 x 750 mm ▶ detaljer 3
4 Stück 103587(01900855) Pressure plates, turned on edge ▶ detaljer 4
1 Stück 100514(01900185) Plastic guide, coloured, ▶ detaljer 5
1 Stück 103415(01900835) Pressure plates 80 x 5 x 1830 mm ▶ detaljer 6
2 Stück 100833(25200000) Split pin no. 6 ▶ detaljer 7
2 Stück 100549(01902356) Cylinder pin, CrMo4, for press ram ▶ detaljer 8
35 Stück 107893(01902152) [ehemals 103374] Set collar 30 x 25, M 12 ▶ detaljer 9
35 Stück 103416(01902155) Set screws ISO 4017 12 x 65 V4A ▶ detaljer 10
35 Stück 103529(01902170) Toothed lock washers M 12 galvanized, DIN 6797 ▶ detaljer 11
35 Stück 103531(01902165) Hexagon nuts ISO 4032 M12 V4A ▶ detaljer 12
2 Stück 107959(01902205) Cylinder attachment Piston SPB/ST SEN/SEL ▶ detaljer 13
2 Stück 103392(01902370) Mounting cover SEL / SEN ▶ detaljer 14
2 Stück 104459 Fuse for mounting cover ▶ detaljer 15
2 Stück 105040 Hexagon head screw ISO 4017 M8x30 ▶ detaljer 16
1 Stück 100526(01901015) Ram plate ▶ detaljer 17
2 Stück 103615(01901130) Tappet for ram plate ▶ detaljer 18
4 Stück 105154(15901041) Fastening screw for driver ▶ detaljer 19
4 Stück 103537(10901030) Self-locking nut M 12 ▶ detaljer Artikkelnummer ny
Husmann reservedelskatalog
7
