The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts. article number ▲ new (old) ▼ ▲ article description: ▼ 1
1 Stück (01902000) Press plunger for SPB AN MB00048835▶ details 2
4 Stück (01900395) Polyamidleiste, PA 6 G natur für SPB AN L 46 x B 5 H 5 cm MB00048746▶ details 3
2 Stück (01900800) Pressure plates for SPB AN L 44 x B 4 H 0.5 cm MB00048738▶ details 4
2 Stück (01900801) Pressure plates, drilled for countersunk rivet for SPB AN L 45 x B 4 H 0.5 cm MB00048737▶ details 5
4 Stück (01900755) Countersunk rivet DIN 302, M10 x 40 ▶ details 6
1 Stück (01900170) Plastic strip, colored for AN für AN L 147.0 x B 8.5 H 4.0 cm MB00048740▶ details 7
1 Stück (01900825) Pressure plate (Naxtra) for SPB AN L 147 x B 0.5 H 8 cm MB00048735▶ details 8
2 Stück (01900460) Polyamide guide, PA 6 G natural-colour for ram extension AN L 12 x B 5 H 19 cm MB00049021▶ details 9
2 Stück (01902100) Ram extension cpl. incl. polyamid and screws L 19 x B 12 H 22.5 cm 5.5 Kg MB00049024 3▶ details 10
8 Stück (01902180) Hexagon head screw ISO 4017 M10x45 ▶ details 11
8 Stück (01902185) Self-locking nut M 10 ISO 10511 ▶ details 12
2 Stück (25200000) Split pin no. 6 8 x 50 ▶ details 13
2 Stück (01902355) Cylinder pin, hardened, for ram AN, K, SEN,SEL, ECA, ECN-L L 21 x B 3.5 cm 1▶ details 14
2 Stück (01902200) Cylinder holder SPB/ST AN Set of 2 pieces MB00048729.001▶ details 15
22 Stück (01902152) [ehemals 103374] Set collar 30 x 25, M 12 mit Bund (Druckstück) SQ00231498▶ details 16
22 Stück (01902155) Set screws ISO 4017 12 x 65 V4A ▶ details 17
22 Stück (01902170) Toothed lock washers M 12 galvanized, DIN 6797 ▶ details 18
22 Stück (01902165) Hexagon nuts ISO 4032 M12 V4A ▶ details 19
2 Stück (01902371) Mounting cover AN ▶ details 20
1 Stück (01901000) Sliding plate for AN incl. driver (top) für AN inkl. Mitnehmer (Oben) L 156.2 x B 51.6 H 5 cm 59 Kg ME00048540▶ details 21
2 Stück (01901121) Horizontal bracket on the middle sliding plate SEL L 15 x B 1 H 3.0 cm 0.3 Kg SF00199361▶ details 21
2 Stück (01901100) Tappet for ram plate for SPB AN top L 6.0 x B 1.5 H 6.8 cm 0.4 Kg ME00048499▶ details 22
4 Stück (15901041) Fastening screw for driver M12 x 40 mm, ISO 4017 ▶ details 23
1 Stück (01901005) Sliding plate for AN incl. driver (bottom) für AN inkl. Mitnehmer (unten) L 156.2 x B 51 H 6.2 cm 59 Kg ME00048580▶ details 24
2 Stück (01901101) Driver for sliding plate for SPB AN below L 6 x B 1.5 H 7.5 cm ME00048552▶ details 25
4 Stück (15901041) Fastening screw for driver M12 x 40 mm, ISO 4017 ▶ details 26
2 Stück Locking piece, bottom sliding plate SPB AN FL. 40 x 10 x 185 ME00048553▶ details 27
4 Stück (15901041) Fastening screw for driver M12 x 40 mm, ISO 4017 ▶ details article number new (article number old)