Husmann reservedelskatalog Artikkelen er delt inn i Under-Maskingrupper fra:SPB AN plunger
🡽 Artiklene for varene som er merket her, vises i listen med det tilsvarende nummeret i parentes.
The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts.
Artikkelnummer ny (gamle)
Beskrivelse av artikkelen:
1
1 Stück 100540 (01902000)
Press plunger for SPB AN
SQA00143039
2
4 Stück 102621 (01900395)
Polyamidleiste, PA 6 G natur für SPB AN
L 46 x B 5 H 5 cm MB00048746
3
2 Stück 103371 (01900800)
Pressure plates for SPB AN
L 44 x B 4 H 0.5 cm MB00048738
4
2 Stück 103372 (01900801)
Pressure plates, drilled for countersunk rivet for SPB AN
L 45 x B 4 H 0.5 cm MB00048737
5
4 Stück 103373 (01900755)
Countersunk rivet DIN 302, M10 x 40
6
1 Stück 100513 (01900170)
Plastic strip, colored for AN für AN
L 147.0 x B 8.5 H 4.0 cm MB00048740
7
1 Stück 103389 (01900825)
Pressure plate (Naxtra) for SPB AN
L 147 x B 0.5 H 7.5 cm MB00048735
8
2 Stück 100520 (01900460)
Polyamide guide, PA 6 G natural-colour for ram extension AN
L 12 x B 5 H 19 cm MB00049021
9
2 Stück 100542 (01902100)
Ram extension cpl. incl. polyamid and screws
L 19 x B 12 H 22.5 cm 5.5 Kg MB00049024
3
10
8 Stück 105173 (01902180)
Hexagon head screw ISO 4017 M10x45
11
8 Stück 104017 (01902185)
Self-locking nut M 10 ISO 10511
12
2 Stück 100833 (25200000)
Split pin no. 6 8 x 50
13
2 Stück 100548 (01902355)
Cylinder pin, hardened, for ram AN, K, SEN,SEL, ECA, ECN-L
L 21 x B 3.5 cm
1
14
2 Stück 103395 (01902200)
Cylinder holder SPB/ST AN Set of 2 pieces
MB00048729.001
15
22 Stück 107893 (01902152) [ehemals 103374]
Set collar 30 x 25, M 12 mit Bund (Druckstück)
SQ00231498
16
22 Stück 103416 (01902155)
Set screws ISO 4017 12 x 65 V4A
17
22 Stück 103529 (01902170)
Toothed lock washers M 12 galvanized, DIN 6797
18
22 Stück 103531 (01902165)
Hexagon nuts ISO 4032 M12 V4A
19
2 Stück 103393 (01902371)
Mounting cover AN
20
1 Stück 103396 (01901000)
Sliding plate for AN incl. driver (top) für AN inkl. Mitnehmer (Oben)
L 156.2 x B 51.6 H 5 cm 59 Kg ME00048540
21
2 Stück 103424 (01901121)
Horizontal bracket on the middle sliding plate SEL
L 15 x B 1 H 3.0 cm 0.3 Kg SF00199361
21
2 Stück 103399 (01901100)
Tappet for ram plate for SPB AN top
L 6.0 x B 1.5 H 6.8 cm 0.4 Kg ME00048499
22
4 Stück 105154 (15901041)
Fastening screw for driver M12 x 40 mm, ISO 4017
23
1 Stück 100525 (01901005)
Sliding plate for AN incl. driver (bottom) für AN inkl. Mitnehmer (unten)
L 156.2 x B 51 H 6.2 cm 59 Kg ME00048580
24
2 Stück 103400 (01901101)
Driver for sliding plate for SPB AN below
L 6 x B 1.5 H 7.5 cm ME00048552
25
4 Stück 105154 (15901041)
Fastening screw for driver M12 x 40 mm, ISO 4017
26
2 Stück 108089
Locking piece, bottom sliding plate SPB AN FL. 40 x 10 x 185
🡽
3