The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts. article number ▲ new (old) ▼ ▲ article description: ▼ 1
1 Stück 104125(01902015) Press plunger for SPB SEN ▶ details 2
4 Stück 100515(01900415) Polyamide strip 85 x 40 x 750 mm ▶ details 3
4 Stück 103587(01900855) Pressure plates, turned on edge ▶ details 4
1 Stück 100514(01900185) Plastic guide, coloured, ▶ details 5
1 Stück 103415(01900835) Pressure plates 80 x 5 x 1830 mm ▶ details 6
2 Stück 100833(25200000) Split pin no. 6 ▶ details 7
2 Stück 100549(01902356) Cylinder pin, CrMo4, for press ram ▶ details 8
35 Stück 107893(01902152) [ehemals 103374] Set collar 30 x 25, M 12 ▶ details 9
35 Stück 103416(01902155) Set screws ISO 4017 12 x 65 V4A ▶ details 10
35 Stück 103529(01902170) Toothed lock washers M 12 galvanized, DIN 6797 ▶ details 11
35 Stück 103531(01902165) Hexagon nuts ISO 4032 M12 V4A ▶ details 12
2 Stück 107959(01902205) Cylinder attachment Piston SPB/ST SEN/SEL ▶ details 13
2 Stück 103392(01902370) Mounting cover SEL / SEN ▶ details 14
2 Stück 104459 Fuse for mounting cover ▶ details 15
2 Stück 105040 Hexagon head screw ISO 4017 M8x30 ▶ details 16
1 Stück 100526(01901015) Ram plate ▶ details 17
2 Stück 103615(01901130) Tappet for ram plate ▶ details 18
4 Stück 105154(15901041) Fastening screw for driver ▶ details 19
4 Stück 103537(10901030) Self-locking nut M 12 ▶ details article number new
Husmann Spare parts catalogue
7
