The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts. article number ▲ new (old) ▼ ▲ article description: ▼ 1
1 Stück (01902015) Press plunger for SPB SEN ▶ details 2
4 Stück (01900415) Polyamide strip 85 x 40 x 750 mm ▶ details 3
4 Stück (01900855) Pressure plates, turned on edge ▶ details 4
1 Stück (01900185) Plastic guide, coloured, ▶ details 5
1 Stück (01900835) Pressure plates 80 x 5 x 1830 mm ▶ details 6
2 Stück (25200000) Split pin no. 6 ▶ details 7
2 Stück (01902356) Cylinder pin, CrMo4, for press ram ▶ details 8
35 Stück (01902152) [ehemals 103374] Set collar 30 x 25, M 12 ▶ details 9
35 Stück (01902155) Set screws ISO 4017 12 x 65 V4A ▶ details 10
35 Stück (01902170) Toothed lock washers M 12 galvanized, DIN 6797 ▶ details 11
35 Stück (01902165) Hexagon nuts ISO 4032 M12 V4A ▶ details 12
2 Stück (01902205) Cylinder attachment Piston SPB/ST SEN/SEL ▶ details 13
2 Stück (01902370) Mounting cover SEL / SEN ▶ details 14
2 Stück Fuse for mounting cover ▶ details 15
2 Stück Hexagon head screw ISO 4017 M8x30 ▶ details 16
1 Stück (01901015) Ram plate ▶ details 17
2 Stück (01901130) Tappet for ram plate ▶ details 18
4 Stück (15901041) Fastening screw for driver ▶ details 19
4 Stück (10901030) Self-locking nut M 12 ▶ details article number new
Husmann Spare parts catalogue
7
