 The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts.
|
article number
new (old) | article description: |
|
1 | | 1 Stück
104125
(01902015) | | Press plunger for SPB SEN |  L 185 x B 78
H 59 cm  408 Kg
 SQ00253160 | 
 7 | | |
|
|
2 | | 4 Stück
100515
(01900415) | | Polyamide strip 85 x 40 x 750 mm
with 2 chamfers for SPB SEN | L 75 x B 8.5
H 4.0 cm 2 Kg
SQ00253253 | | | |
|
|
3 | | 4 Stück
103587
(01900855) | | Pressure plates, turned on edge
80/25 x 5 x 750 mm SEN, EHN, Naxtra | L 74.5 x B 11.1
H 0.5 cm
SQ00253527 | | | |
|
|
4 | | 1 Stück
100514
(01900185) | | Plastic guide, coloured,
for SEN, SEL | L 184 x B 8.5
H 4 cm 6 Kg
SQ00231529 | | | |
|
|
5 | | 1 Stück
103415
(01900835) | | Pressure plates 80 x 5 x 1830 mm
for SPB SEN / SEL | L 183 x B 8
H 0.5 cm
SQ00231520 | | | |
|
|
6 | | 2 Stück
100833
(25200000) | | Split pin no. 6
8 x 50 | | | | |
|
|
7 | | 2 Stück
100549
(01902356) | | Cylinder pin, CrMo4, for press ram | L 21 x B 3.5 cm
MB00140853 | | | |
|
|
8 | | 35 Stück
103374
(01902150) | | Set collar 30 x 25, M 12 | | | | |
|
|
9 | | 35 Stück
103416
(01902155) | | Set screws DIN 933 12 x 65 V4A | | | | |
|
|
10 | | 35 Stück
103529
(01902170) | | Toothed lock washers M 12 galvanized, DIN 6797 | | | | |
|
|
11 | | 35 Stück
103531
(01902165) | | Hexagon nuts DIN 934 M12 V4A | | | | |
|
|
12 | | 2 Stück
107959
(01902205) | | Cylinder attachment Piston SPB/ST SEN/SEL |
SQ00231523 | | | |
|
|
13 | | 2 Stück
103392
(01902370) | | Mounting cover SEL / SEN
100 mm diameter | |
2 | | |
|
|
14 | | 2 Stück
104459 | | Fuse for mounting cover
Fl. 20 x 10 x 90 mm |
SQ00231471 | | | |
|
|
15 | | 2 Stück
105040 | | Hexagon head screw ISO 4017 M8x30 | | | | |
|
|
16 | | 1 Stück
100526
(01901015) | | Ram plate
for SPB SEN inkl. driver | L 183.5 x B 5.8
H 67.1 cm 118 Kg
SF00199109 |
3 | | |
|
|
17 | | 2 Stück
103615
(01901130) | | Tappet for ram plate
for SPB SEN | 1.4 Kg | | | |
|
|
18 | | 4 Stück
105154
(15901041) | | Fastening screw for driver
M12 x 40 mm, DIN 933 | | | | |
|
|
19 | | 4 Stück
103537
(10901030) | | Self-locking nut M 12
DIN 985 | | | | |
|
article number new
(article number old) |
