The guides of the plunger are made of maintenance-free and low-wear polyamide. Nevertheless, they should be checked every six months or after 500 hours and adjusted if necessary.
if necessary. This is done using adjusting screws with lock nuts. article number ▲ new (old) ▼ ▲ article description: ▼ #01 100511(01900132) Polystone M guide, green, with 2 chamfers for SPB SEL L 65 x B 8.5 H 4 cm 2 Kg MB00050427▶ details #02 100514(01900185) Plastic guide, coloured, for SEN, SEL L 184 x B 8.5 H 4 cm 6 Kg SQ00231529▶ details #03 100527(01901020) Sliding plate for SEL incl. driver (top) für SEL inkl. Mitnehmer (Oben) L 193 x B 47.3 H 4.6 cm 115 Kg SF50008579 1▶ details #04 100529(01901025) Sliding plate for SEL incl. driver (middle) für SEL inkl. Mitnehmer (Mitte) L 193 x B 47.3 H 4.6 cm 115 Kg SF50008602 2▶ details #05 100531(01901030) Sliding plate for SEL incl. driver (bottom) L 193 x B 47.3 H 4.6 cm 115 Kg SF00199288 2▶ details #06 100541(01902025) Press plunger for SPB SEL & ST SEL L 195 x B 67.5 H 59.2 cm 400 Kg SQ00231673▶ details #07 100548(01902355) Cylinder pin, hardened, for ram AN, K, SEN,SEL, ECA, ECN-L L 21 x B 3.5 cm 1▶ details #08 100833(25200000) Split pin no. 6 8 x 50 ▶ details #09 103392(01902370) Mounting cover SEL / SEN 80 mm diameter 2▶ details #10 103414(01900850) Pressure plates, turned on edge for SPB SEL L 64.5 x B 11.1 H 0.5 cm SQ00231521▶ details #11 103415(01900835) Pressure plates 80 x 5 x 1830 mm for SPB SEN / SEL L 183 x B 8 H 0.5 cm SQ00231520▶ details #12 103416(01902155) Set screws ISO 4017 12 x 65 V4A ▶ details #13 103420(01901115) Bracket on the sliding plate, bottom Fl. 40 x 10 x 190 mm SF00199191▶ details #14 103421(01901127) Fastening lug Tapp. Sliding plate Fl. 30 x 10 x 100 mm ▶ details #15 103422(01901120) tappet for ram plate for SPB SEL Vertical L 6.0 x B 1.5 H 8.0 cm 0.5 Kg SF00199192▶ details #16 103424(01901121) Horizontal bracket on the middle sliding plate SEL L 15 x B 1 H 3.0 cm 0.3 Kg SF00199361▶ details #17 103425(01901126) Retaining piece for driver from the SEL sliding plate top SF00199197▶ details #18 103427(01901125) Carrier for top SEL sliding plate incl. screw connection ▶ details #19 103529(01902170) Toothed lock washers M 12 galvanized, DIN 6797 ▶ details #20 103531(01902165) Hexagon nuts ISO 4032 M12 V4A ▶ details #21 103534(01901118) Fastening screw for carrier Sliding plate SEL, bottom/ center M 12 x 50 ISO 4017 8.8 ▶ details #22 103536(01901117) Fastening screw for carrier M 12 x 40 ISO 4017 8.8 ▶ details #23 103537(10901030) Self-locking nut M 12 DIN 985 ▶ details #24 107893(01902152) [ehemals 103374] Set collar 30 x 25, M 12 mit Bund (Druckstück) SQ00231498▶ details #25 107959(01902205) Cylinder attachment Piston SPB/ST SEN/SEL SQ00231523▶ details article number new (article number old)